MATERIAL SAFETY DATA SHEET                Page 1 of 5
 
1.  Chemical Product and Company Identification

Product Name:  CAM2 AW Hydraulic 32
Product Code:   202
Chemical Name: Hydraulic Oil
Chemical Family: Blend
Manufacturer:   CAM2 Oil Products Company                        Emergency Telephone Numbers:
                              380 West Butler Avenue                                           Transportation:  215-244-2114     8am-5pm EST M-F
                              New Britain, PA 18901                                              CHEMTREC:   800-424-9300       24 hrs Everyday
 
2.  Composition/Information on Ingredients

EXPOSURE GUIDELINES
                                                                                                                      OSHA                       ACGIH
Component/CAS Number                     LO%        HI%               TWA     STEL          TWA     STEL            UNIT
LIMITS FOR THE PRODUCT                                                                   5                                            5               MG/M3
SEVERELY SOLVENT REFINED HEAVY PARAFFINIC PETROLEUM OIL
                  64741-88-4                            90..00       100.00                          5                                             5               MG/M3
ZINC DIALKYL DITHIOPHOSPHATE
                  68649-42-3                                 .00          1.00            NO SPECIFIC LIMIT
ACRYLIC COPOLYMER
                  68171-46-0                                 .00          1.00            NO SPECIFIC LIMIT
CALCIUM SULFONATE
                  61789-86-4                                 .00          1.00            NO SPECIFIC LIMIT
2-ETHYLHEXANOL
                      104-76-7                                 .00          1.00            NO SPECIFIC LIMIT
ADDITIONAL EXPOSURE LIMITS--------------------------------------------------------------GOVERNMENT REGULATION
                    OTHER LIMIT – OIL MIST: 5 MG/M3                                                                 OSHA PEL/ACGIH TLV
 
3.  Hazard Identification

EMERGENCY OVERVIEW
MAY CAUSE SKIN IRRITATION
APPEARANCE:   AMBER FLUID                       ODOR:   SLIGHT ODOR
POTENTIAL HEALTH EFFECTS:
INHALATION:   NO EFFECTS EXPECTED.                              INGESTION:  PRACTICALLY NON-TOXIC.
EYE CONTACT:  EXPECTED TO BE MINOR EYE IRRITANT.
SKIN CONTACT:   PRACTICALLY NON- TOXIC IF ABSORBED (LD50 > 2000 MG/KG).  MAY CAUSE MODERATE IRRITATION WITH PROLONGED OR REPEATED CONTACT..
CARCINOGEN LISTED BY:  IARC (NO)   NTP (NO)   OSHA (NO)   ACGIH (NO)   OTHER (NO)
 

Revision: 08/25/97                        NA=Not Applicable ND=No Data                  NE=Not Established
 
 

CAM2 AW Hydraulic 32                                                                                                                                   Page 2 of 5
 

        NFPA/HMIS CLASSIFICATION                                                         HAZARD RATING
              HEALTH – 0/0                                                                       0= LEAST                    1=SLIGHT
              FLAMMABILITY – 1/1                                                       2=MODERATE            3=HIGH
              REACTIVITY – 0/0                                                                                4=EXTREME

 
4.  First Aid Measures

INHALATION:   Move to fresh air.
EYE CONTACT:  Flush with water for at least 15 minutes.  If irritation persists, obtain medical assistance.
SKIN CONTACT:  Wash with soap and water until no odor remains.  If redness or swelling develops, obtain medical assistance.  Wash clothing before reuse
INGESTION:  Practically non-toxic.  Induction of vomiting not required.  Obtain emergency medical attention.  Small amounts which accidentally enter mouth should be rinsed out until taste of it is gone.
 
5.  Fire Fighting Measures

FLASHPOINT (METHOD):   395°EF Minumum COC; 201°C Minimum COC
FLAMMABLE LIMITS:  Not established
AUTOIGNITION TEMP:   675° F (Estimated); 359° C (Estimated)
EXTINGUISHING MEDIA:   Water spray, dry chemical, carbon dioxide (CO2), foam.
FIRE FIGHTING INSTRUCTIONS:   Avoid breathing smoke and vapor.
FIRE FIGHTING EQUIPMENT:   Wear self-contained breathing apparatus and protective clothing.  Use water spray to keep fire-exposed containers cool
HAZARDOUS COMBUSTION PRODUCTS:   Normal combustion forms carbon dioxide and water vapor; incomplete combustion can produce carbon monoxide.
 
6.  Accidental Release Measures

SPILLS OR LEAKS:   Contain spill, advise EPA; state agency if required.  Absorb on inert material, shovel, sweep or vacuum spill.
 
7.  Handling and Storage

NFPA Class IIIB Storage.  Wash thoroughly after handling.
 
8.  Exposure Controls/Personal Protection

VENTILATION:   Ventilate as needed to comply with exposure limit.  General dilution ventilation acceptable.
PERSONAL PROTECTIVE EQUIPMENT:
EYE:   Splash proof chemical goggles recommended to protect against splash of product.
GLOVES:   Protective gloves recommended when prolonged skin contact cannot be avoided.  The following glove materials are acceptable:  polyvinyl chloride (PVC); neoprene; nitrile; polyvinyl alcohol; viton.

Revision: 08/25/97                        NA=Not Applicable ND=No Data                  NE=Not Established

CAM2 AW Hydraulic 32                                                                                                                                  Page 3 of 5

RESPIRATOR:   Concentration in air determines protection needed.  Use only NIOSH certified respiratory protection.  Respiratory protection usually not needed unless product is heated or misted.  Half-mask air purifying respirator with dust/mist filters or HEPA filter cartridges is acceptable to 10 times the exposure limit.  Full face air purifying respirator with dust/mist filters of HEPA filter cartridges is acceptable to 50 times the exposure limit.  Protection by air purifying respirators is limited.  Use a positive pressure demand full face supplied air respirator or SCBA for exposures above 50X the exposure limit.  If exposure is above IDLH (immediately dangerous to life and health) or there is the possibility of an uncontrolled release or exposure levels are unknown then use a positive pressure demand full face supplied air respirator with escape bottle or SCBA.
OTHER:   If contact is unavoidable, wear chemical resistant clothing.  The following materials are acceptable as protective clothing materials:  polyvinyl alcohol (PVA); polyvinyl chloride (PVC); neoprene; nitrile; viton; polyurethane; launder soiled clothes.
 
9.  Physical and Chemical Properties

APPEARANCE/ODOR:   AMBER FLUID/SLIGHT ODOR.                              BOILING POINT:   HIGH
VAPOR PRESSURE:   <0.0001 (MM HG @ 20°C)                                              MELTING POINT:   N/A
MOLECULAR WEIGHT:   N/A (G/MOLE)                                                          PACKING DENSITY:   N/A
SOLUBILITY IN WATER:   NIL (% BY VOLUME)                                           OCTANOL/WATER COEFF.:   N.D.
EVAPORATION RATE:   1000X SLOWER (ETHYL ETHER=1)                      ODOR THRESHOLD:   N.D.
SPECIFIC GRAVITY:   0.86 (WATER=1)                                                            VAPOR DENSITY:   10+ (AIR =1)
VISCOSITY:   150 SUS @ 100°F  32 CST @ 40°C
 
10.  Stability and Reactivity

STABILITY:  Stable.
CONDITIONS TO AVOID:  None known.
MATERIALS TO AVOID:  Strong oxidizing agents.
HAZARDOUS POLYMERIZATION:  Will not occur.
HAZARDOUS DECOMPOSITION:  Combustion will produce carbon monoxide and asphyxiants.
 
11.  Toxicological Information

FOR THE PRODUCT –
INHALATION:  Low acute toxicity.  SKIN: Practically non-toxic if absorbed.  Mild irritation with prolonged or repeated contact.  EYE:  Mildly irritating on contact. ORAL:  Practically non-toxic
acute toxicity:  estimated oral LD50 in rats is : > 15 g/kg.  estimated draize skin irritation score is : 2.l0 out of 8.0
SEVERELY SOLVENT REFINED HEAVY PARAFFINIC PETROLEUM OIL:  INHALATION:  low acute toxicity.  SKIN:  Practically non-toxic if absorbed.  May cause moderate irritation with prolonged and repeated contact.  EYE:  Minimally irritating on contact.  INGESTION:  Practically non-toxic if swallowed.
CALCIUM SULFONATE:  INHALATION/INGESTION:  No data available.  SKIN:  Moderate irritant.  Cause allergic skin reaction in animals.  EYE:  Moderate to severe irritation.
BUTYLATED PHENOL:   No data available for all routes of exposure.
ZINC DIALLKLY DITHIOPHOSPHATE:   INHALATION:  Toxic hydrogen sulfide is generated when heated above 200 deg. F.  This can cause central nervous system (brain) effects, nausea, dizziness, confusion, loss of sense of smell, muscle cramps, in coordination, unconsciousness, coma, respiratory failure, or death.  SKIN:  Prolonged or repeated contact may cause moderate irritation, redness, drying, cracking, dermatitis.

Revision: 08/25/97                        NA=Not Applicable ND=No Data                  NE=Not Established

CAM2 AW Hydraulic 32                                                                                                                                  Page 4 of 5

EYE:  Irritant.  ORAL:  Harmful if swallowed.
ACRYLIC COPOLYMER:  No data available for all routes of exposure.
2-ETHYLHEXANOL:  INHALATION:  Overexposure may cause nose, throat irritation, nasal discomfort and discharge, chest pain, cough, headache, nausea, vomiting.  SKIN:  Irritant.  May cause corneal injury.  ORAL:  Moderately toxic.  May cause abdominal discomfort, nausea, vomiting, and diarrhea.
 
12.  Ecological Information

ECOTOXICITY:   No data available.
 
13.  Disposal Information

Follow federal, state and local regulations.  Not RCRA hazardous waste if uncontaminated.  If “used”, RCRA criteria (ignitability, reactivity corrosivity, toxicity characteristics) must be determined.  Do not flush to drain/storm sewer.  Contract to authorized disposal service.
 
14.  Transportation Information

DOT
PROPER SHIPPING NAME Petroleum Lubricating Oil
HAZARD CLASS:  Not regulated
ID NUMBER:   Not regulated
LABEL REQUIRED:  Not-regulated
IMDG PROPER SHIPPING NAME: N.D.
IATA PROPER SHIPPING NAME: N.D.
 
15.  Regulatory Information

TSCA:  This material is in compliance with the TOXIC SUBSTANCES CONTROL ACT (15 USC 2601-2629) and is listed in the TSCA Inventory.

SARA 302 THRESHOLD PLANNING QUANTITY,   N/A
SARA 304 REPORTABLE QUANTITY      N/A
SARA 311/312 REPORTING:   Health  Immediate (Acute) No
                                                      Health  Delayed (Chronic) No
                                                      Physical Fire  No
                                                      Physical Sudden Release of Pressure  No
                                                      Physical Reactive  No

When a product and/or component is listed below, the regulatory list on which it appears is indicated.

        ZINC DIALKYL DITHIOPHOSPHATE – NJ  01

Revision: 08/25/97                        NA=Not Applicable ND=No Data                   NE=Not Established
 

CAM2 AW Hydraulic 32                                                                                                                                  Page 5 of 5

01=SARA 313                                        02= SARA 302/304                                  03=IARC CARCINOGEN
04=OSHA CARCINOGEN                   05=ACGIH CARCINOGEN                     06=NTP CARCINOGEN
07=CERCLA 302.4                                08=WHMIS CONTROLLED PROD.
10=OTHER CARCINOGEN
PA=PA RTK                                         NJ=NEW JERSEY RTK                           CA=CALIFORNIA PROP 65
MA=MASS. RTK                                MI=MICHIGAN 406                                MN=MINNESOTA RTK
FL=FLORIDA                                       RI=RHODE ISLAND                               IL=ILLINOIS
NY=NEW YORK                                  WV=WEST VIRGINIA                           CT=CONNECTICUT
LA=LOUISIANA                                 ME=MAINE  OH=OHIO
 
16.  Other Information

CAM2 OIL PRODUCTS COMPANY
380 WEST BUTLER AVENUE
NEW BRITAIN, PA 18901
215-340-CAM2(2262)

The information on this form is furnished solely for the purpose of compliance with the OSHA Act, and shall not be used for any other purpose.  The information herein is given in good faith and is based on data considered accurate.  However, no warranty, expressed or implied, is made regarding the accuracy of these data or the results to be obtained from the use thereof.

Revision: 08/25/97                        NA=Not Applicable ND=No Data                   NE=Not Established